2002 buick regal remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117576
Printed Date: July 06, 2025 at 5:12 AM

Topic: 2002 buick regal remote start

Posted By: mmart90
Subject: 2002 buick regal remote start
Date Posted: November 08, 2009 at 6:47 PM

I am attempting to install a Viper 5901 into a 2002 Buick Regal, for the remote start I am using a idatalink ADS-TBSL PL. Im having alot a trouble with the installation diagram provided by viper. I am very new at this, any info would be a giant help.

-------------
AZbuick

Replies:

Posted By: mmart90
Date Posted: November 09, 2009 at 12:25 PM

I know this is probably a dumb question.. but where do i connect the ground out when running?? I have a 2002 buick regal ls

-------------
AZbuick

Posted By: mmart90
Date Posted: November 09, 2009 at 12:27 PM

this is for a transponder immobilizer bypass.. the idatalink solo series

-------------
AZbuick

Posted By: KPierson
Date Posted: November 09, 2009 at 12:56 PM

If you are trying to hook up a security bypass the GWR wire typically hooks to a status output of the alarm - that is a signal that is grouneded whenever the remote start is active.

-------------
Kevin Pierson

Posted By: mmart90
Date Posted: November 09, 2009 at 2:20 PM

When installing a remote start.. Do I need to connect the flex relay.. What is it for??

-------------
AZbuick

Print Page | Close Window