Print Page | Close Window

astrostart wire color for the hood swch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117613
Printed Date: May 02, 2025 at 1:37 PM


Topic: astrostart wire color for the hood swch

Posted By: timmi
Subject: astrostart wire color for the hood swch
Date Posted: November 09, 2009 at 9:38 PM

hello.. I lost my install manual for my astrostart 2205 and i need to reprogram a new remote... can someone remind me what color of wire is used for the hood switch? (hood switch was never hooked up) my diagram on the back of the brain box got torn off too...   

thanks!



Replies:

Posted By: timmi
Date Posted: November 09, 2009 at 10:27 PM
nevermind.. i found it online... BLACK/ red wire... yay



Posted By: KarTuneMan
Date Posted: November 10, 2009 at 1:05 AM

You do not need the hood pin for programming a new transmitter.

Put dip #8 up, hit the foot brake 1 time, push a button on ALL the remotes you have.... then put # 8 down, and hit the foot brake. done.



-------------


Print Page | Close Window