Print Page | Close Window

Clifford Siren - Simple question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11764
Printed Date: June 22, 2025 at 7:08 PM


Topic: Clifford Siren - Simple question

Posted By: Black Se7en
Subject: Clifford Siren - Simple question
Date Posted: April 02, 2003 at 4:41 PM

Is it possible to do this? I need to know how the Clifford siren works. Its multitone so I'm not sure how it really works. With the two wires that go into it, is it as simple as a (+) and (-) wire?

I want to hook up a relay to drive the siren seperate from the alarm head unit. What I'm trying to do is set it up to use as a warn away instead of putting in a Piezo siren.  Is this possible?

On the relay, I would hook up the 85 to the warn away (-) output from the sensor, 87 to a 12v (+) or ground (not sure, depends on the siren), 30 would go to the siren itself, and 86 would goto a 12v (+)

Please let me know if this is possible. Thanks!




Replies:

Posted By: x6369x
Date Posted: April 02, 2003 at 10:16 PM
You've got it.

-------------
Friends Don't Let Friends Bump Stock.


Print Page | Close Window