Print Page | Close Window

flasher fuse blowing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117667
Printed Date: May 18, 2024 at 4:04 PM


Topic: flasher fuse blowing

Posted By: riz k
Subject: flasher fuse blowing
Date Posted: November 12, 2009 at 4:00 AM

Hi i have 1998 impreza with a clifford 3.3x installed and the fuse for the light flasher keeps blowing do i need to replace the fuse with a resistor or put it through a relay or something.can anyone help me out



Replies:

Posted By: howie ll
Date Posted: November 12, 2009 at 9:45 AM

Does it blow when you arm/disarm the alarm or when you use your lights.? Are we talking lights or indicators. If indicators you need to take the white lead from the 3.3, and join to your side light circuit if pos going. If neg, set it to neg. If you're using indicators take the white lead  (set the alarm for neg) and join to 85 on a relay, join 30 and 86 to a constant 12volts,fused 20 amps take 87 as the output and split via 2 x 1N5404 diodes, band out towards each indicator wire. I've done dozens of late 90s Imprezzas with never a problem.


Print Page | Close Window