acura 3.2l

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117674
Printed Date: May 05, 2024 at 5:22 AM

Topic: acura 3.2l

Posted By: maxcat
Subject: acura 3.2l
Date Posted: November 12, 2009 at 11:25 AM

Hey all , about to start a r/s install on a 2003 Acura TL 3.2L and all the info I have points toward getting the lock/unlock, arm/disarm wires in the drivers door. Does anyone know if that is the only location for these wires.Just did not really want to remove the door skin if I didn't have to. Any tips or advice would be greatly appreciated.

Thanks in advance

Replies:

Posted By: skee-weezy
Date Posted: November 12, 2009 at 12:25 PM

Only known location listed on just about every tech site i checked. I believe it could also be done via data with some of the newer interface modules. May wanna check into those... cost a little more but will save you time from having to go into that door!!!

-------------
there can be only one.......

Posted By: maxcat
Date Posted: November 12, 2009 at 1:05 PM

thanks skee-weezy for the reply, yea I have checked a whole bunch of interface modules out there only to find they only do the transponder bypass, but I will keep looking.

Again thank you for the reply

Print Page | Close Window