idatalink module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117689
Printed Date: May 15, 2025 at 8:19 AM

Topic: idatalink module

Posted By: steezs
Subject: idatalink module
Date Posted: November 12, 2009 at 7:31 PM

I was just wondering what size fuse should I use when hard wiring an Idatalink module?

-------------
THE DUCE

Replies:

Posted By: Mike M2
Date Posted: November 12, 2009 at 8:25 PM

Hmm, we use Avox product and it has inline fuses. I simply tap into the Avox before the fuses so they cover the Idata unit too. If yours doesn't, a 5amp would easily do it.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: Steven Kephart
Date Posted: November 13, 2009 at 9:57 PM

Idatalink doesn't have one on it's power wire. I always attach it to the alarm brains power wire and have it protected by the alarms fuse.

Print Page | Close Window