04 jetta, viper 5901
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117706
Printed Date: May 07, 2024 at 5:02 AM
Topic: 04 jetta, viper 5901
Posted By: 05gt
Subject: 04 jetta, viper 5901
Date Posted: November 13, 2009 at 1:51 PM
HI I have one quick question regarding the clutch bypass on this car it says To bypass the clutch , with a relay program for starter, shorting out the BROWN / White and RED / Black together, will this relay diagram be correct pin 87 (to one of the clutch wires), pin 30 (to the other clutch wire), pin 85 (to Ground when running status), pin 86 (12 volts) thanks for the help Mike
Replies:
Posted By: wblakes
Date Posted: November 13, 2009 at 3:30 PM
instead of using the "ground when running status output" you should just use the negative starter output to bypass the clutch. that way the clutch is only bypass when the car is starting and not bypassed the whole time you remote start the car.
Posted By: 05gt
Date Posted: November 13, 2009 at 5:35 PM
okay will do, thanks for the help
Posted By: 05gt
Date Posted: November 13, 2009 at 7:32 PM
okay so, I am workign on a 2004 jetta, i am installing a viper 5901 and the idatalink ads-al-ca module doorpin, trunkpin, trunk release, and foot brake work through the data connection, but the lock and unlock feature do not work, I find this wierd because usually it is the other way around, the bypass programmed correctly so I am kind puzzled by this anyone have any suggestions Mike
Posted By: 05gt
Date Posted: November 13, 2009 at 10:32 PM
anyone run into this issue before? Mike
Posted By: 05gt
Date Posted: November 16, 2009 at 10:05 PM
anyone have any info on this Mike
Posted By: Velocity Motors
Date Posted: November 18, 2009 at 8:05 AM
What cable are you using for the D2D ? or are you using W2W ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: 05gt
Date Posted: November 18, 2009 at 3:42 PM
I am using it in D2D and it is the cable that is made to connect DEI products to the idatalink bypasses
|