530t conntected to trunk release output?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117762
Printed Date: May 22, 2024 at 5:07 AM

Topic: 530t conntected to trunk release output?

Posted By: snowboarderandy
Subject: 530t conntected to trunk release output?
Date Posted: November 16, 2009 at 1:37 AM

I have a Viper 5901 in my 2000 Ford Expedition and I would like to add a 530t window module to my front 2 windows.

Should I hook the RED / White (-) Auxiliary Input wire on the 530t to the H1/1 RED / White Trunk Release Output wire on the 5901? or should it be hooked up to the H2/3 WHITE/ Violet Aux 1 Output wire?

I would like to be able to press and hold down the Aux button to vent and then completely roll down the windows. If I connect the RED / White Aux input wire to the H2/3 Aux 1 Output wire, will I have to press the function button then the aux button to activate the windows?

-------------
Thanks,
Andy

Replies:

Posted By: howie ll
Date Posted: November 16, 2009 at 2:31 AM

Yes but any other aux output is normally used also to get full 530t functioning, RED / white takes about 3 secs. before it responds, also use the orange GWA output and run to both window motors, then you have 1 touch from both front doors.

Posted By: snowboarderandy
Date Posted: November 16, 2009 at 5:45 PM

Ok I think I will connect it to the H2/3 WHITE/ Violet Aux 1 Output wire. I will also use the Orange GWA wire.

Thank you for your help.

-------------
Thanks,
Andy