mercedes w124
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117763
Printed Date: July 06, 2025 at 10:58 AM
Topic: mercedes w124
Posted By: red_lion
Subject: mercedes w124
Date Posted: November 16, 2009 at 7:08 AM
Hello I'm lionel, I have a Mercedes w124 1992. I would like to know how to connect the DEI 530t on my 4 windows because I have a module of convienence with closing has the cle and how to adapt the drive lock system (when the car move the door lock automatic)please it' S very significant thanks
Replies:
Posted By: howie ll
Date Posted: November 16, 2009 at 10:11 AM
Look in the 530t instruction manual, positive at rest. Ignition controlled locking is covered in the relay section on this site. Having said that most modern alarms already have this facility. Your locking type is one wire, vacuum pump control. Remember 2 x 530ts required and 4 x relays. Just a thought but doesn't that car have a comfort close, i.e. when you turn the driver's door key to lock and hold it there this will bring up the windows. Again you will need a modern alarm to control this if the facility is there. What alarm?
Posted By: red_lion
Date Posted: November 19, 2009 at 7:29 AM
I have a viper 5902 .Please help could i need your help how to connect to 530t in my car and viper 5902,how to adapte a system drive lock in my car.Yes I have a comfort close system when I turn the driver's door key to lock and hold it there this will bring up the windows.excuse me for my english I'm frenchman.
Posted By: howie ll
Date Posted: November 19, 2009 at 7:41 AM
You have to set the Viper locks as Vacuum type, see instructions. You will need 2 x relays or the DEI 450t relay set. Second you adapt one of the aux leads via either the programming or a Bitwriter to activate on arming for 20 seconds. This is connected to a yellow/blue wire in the floor lom, driver's side. This is a very complicated car to do the locks and close, forget the 530t it's not necccessary. It's probably simpler to send me a return air ticket to the Congo!!!!
Posted By: howie ll
Date Posted: November 19, 2009 at 7:44 AM
It would probably cost you less than a local install job and I'm not joking I've been all over Europe and the US with this job, as far as Houston Texas and Kuwait (not on the same day)
Posted By: red_lion
Date Posted: November 21, 2009 at 7:56 AM
I want to install this system (Drive lock) and windows up and down when I lock my car please show me how to do .Thank you.
Posted By: howie ll
Date Posted: November 21, 2009 at 1:17 PM
It would take about 2 pages of info just to do this car and we don't even now whether it's petrol or diesel!
Posted By: red_lion
Date Posted: December 23, 2009 at 6:50 AM
Excuse me for a long time to reply,
Please help me .I need this .My car is petrol.I know that to take 2 pages but please help me.
Thank you.
Posted By: howie ll
Date Posted: December 23, 2009 at 3:10 PM
Look to vehicle wiring, this site, M/Benz 300 circa 1992. It lists everything other than window close which is a yellow/blue lead, sits in a black rubbery sleeving or tube accompanied by a RED / white and a BROWN / black. You use a timed aux output which you set to activate on arming to close your windows and roof.
Posted By: red_lion
Date Posted: December 24, 2009 at 2:21 AM
well for lock I know how to do,but I look how to do drive lock and how to install dei 530 with 4 windows.do you have a guide for help me
Posted By: howie ll
Date Posted: December 24, 2009 at 2:26 AM
YOU DON'T NEED THE 530ts!And the unit can be programmed to do auto lock, that's a default setting! You have to do it yourself, take it one stage at a time and I'll help, although its -4c here at the moment, the Congo is sounding very appealing.
|