prostart ct 5010 additional programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117788
Printed Date: May 13, 2024 at 11:51 PM
Topic: prostart ct 5010 additional programming
Posted By: shaun319
Subject: prostart ct 5010 additional programming
Date Posted: November 16, 2009 at 8:19 PM
I have just installed my RS into my Montana and have all 3 parts working fine (remote start, alarm, key less) but what I am wanting to do now is some additional programming.
I would like to be able to get rid of the 30 second auto arm and shut off the chirping when arming and disarming (unless an intrusion was detected)
-------------
If you don't stand behind our troops, feel free to stand in front of them.
Replies:
Posted By: bruc007
Date Posted: November 17, 2009 at 11:16 AM
This is a similiar model with the same programming.You need to program it to active arming
https://www.engines911.com/asdocs/CT-5000_ig_en_h370s380v355_040909.pdf
If this link doesnt work ,go to www.prostart.org , go to support and install guides
Posted By: shaun319
Date Posted: November 24, 2009 at 6:12 PM
thanks for that link, I got it all working the way I want. I used the info on 5072 to install my unit and it didn't have all the info that the 5000 had.
-------------
If you don't stand behind our troops, feel free to stand in front of them.
|