06 ford 500 dei 4103
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117834
Printed Date: July 06, 2025 at 10:41 AM
Topic: 06 ford 500 dei 4103
Posted By: chev104275
Subject: 06 ford 500 dei 4103
Date Posted: November 18, 2009 at 2:15 PM
I installed an avital 4103 into a 2006 ford five hundred yesterday. Everything works great except for the ingition controled door locks. I turned them on in menu 1 options 2 and 3 but they dont respond to the ingition. Any one have any ideas ?
Thanks Joe
P.S
I used the pink / YELLOW for lock and pink/green for unlock in the drivers kick panel. The locks operate fine using the 4103 remote
-------------
If i Can't Install it I Don't need it Joe
Replies:
Posted By: t&t tech
Date Posted: November 18, 2009 at 7:46 PM
Manually lock the doors and switch the ignition on then off! Do the doors unlock? Let me know!
Posted By: howie ll
Date Posted: November 19, 2009 at 12:46 AM
Surely that like all of the similar DEI units comes with that feature turned on as default. You may have turned it off! If not do your door triggers shut down as soon as you close the doors? There, I've given you a clue.
Posted By: chev104275
Date Posted: November 19, 2009 at 5:45 AM
t&t no the doors do not unlock
Howie that feature comes turned off as default as far as the door triggers go there is no door triggers hooked up. The 4103 doesnt have any
I tried closing the door letting the dome light go out. Then tried cycling the ing with the doors closed. Both manually locked and manually unlocked they dont respond
any other ideas ? Thanks so far
-------------
If i Can't Install it I Don't need it Joe
Posted By: chev104275
Date Posted: November 26, 2009 at 6:00 PM
any other ideas ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: t&t tech
Date Posted: November 27, 2009 at 7:23 PM
Is the alarm seeing igniton? Might seem obvious but i thought i'd ask anyway!
Posted By: chev104275
Date Posted: November 28, 2009 at 7:54 AM
the only ingition wire it has to hook up is on the heavy gauge harness i dont have the car in front of me but i assume so as the starter works fine no dash lights on or anything
-------------
If i Can't Install it I Don't need it Joe
|