honda odyssey sliding doors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117840
Printed Date: June 04, 2024 at 11:02 AM

Topic: honda odyssey sliding doors

Posted By: hondacc99
Subject: honda odyssey sliding doors
Date Posted: November 18, 2009 at 6:02 PM

i install a Prostart model CT-3471 TW with Transponder Bypass ADS-DL for honda odyssey 2006. i using idatallink (RS232) to commucation with the Remote Starter (in the wiring diagram of idatalink say if using RS232 standard wiring not required). and from the Remote Starter i didn't wiring any door (lock/unlock) and Aux 1, Aux2 and Aux 3.

i can remote starter a car and lock/unlock no problem. ( in idatalink NOTE saying when vehicle is remote started feature sliding doors will not be functinal use traditional hardwired installation method ofr feature to be functional during remote start).

but i can't Open/Close sliding door even without vehicle is remote start.

my question is do i still need to wiring sliding door using Aux1 and Aux 2 for sliding door?

thanks

Replies:

Posted By: Velocity Motors
Date Posted: November 18, 2009 at 9:22 PM

Yes, the sliding door feature is disabled when the vehicle is running, so you will need to wire in the AUX channels to the module in order to operate the sliding doors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: hondacc99
Date Posted: November 19, 2009 at 10:38 AM

Thank Jeff for your reply....

So i have to wire the Prostart to ADS-DL

Aux1 blue / white to purple / yellow of ADS-DL ( left sliding door)

Aux2 gray / light bule to purple / black of ADS-DL ( right sliding door)