pkall hell

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117876
Printed Date: May 20, 2025 at 6:02 PM

Topic: pkall hell

Posted By: masterodisaster
Subject: pkall hell
Date Posted: November 19, 2009 at 11:23 PM

Anyone else have MAJOR issues with these modules being "already programmed", or not wanting to program?

Replies:

Posted By: another-kelly
Date Posted: November 20, 2009 at 12:18 AM

i've been using them a bit over a year and the only gripe i have is the manual. it lists different info in the front "index" than it does in the back for other vehicles. even the most current manual they had online still had the programming directions wrong for an infinity that i did last month

Posted By: robertsc
Date Posted: November 20, 2009 at 12:21 PM

I have put in lots of keyoverridealls which is the same piece with 0 issues

Posted By: chriswallace187
Date Posted: November 23, 2009 at 6:17 PM

On a Toyota, yes. I think it's absolutely retarded that they're not resettable - who the hell is going to use one to steal a car anyway?

Read here for more.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: yimke
Date Posted: November 24, 2009 at 9:31 AM

Never had an issue. Double and triple check your wiring. Then double test your voltage making sure you are getting the correct inputs at the right time. Example is an ignition input accidentally set on 12v constant.

Simple things like connecting colors together when they are not supposed to happens. Your brain thinks one way, but your sub-conscious does another.

Also try updating to the most current version.

What vehicle are you working on?

Posted By: pitoaudiovisual
Date Posted: December 06, 2009 at 2:18 AM

i had an issue with a PKALL the other day with an Acura TL and come to find out that it has to be updated and u have to buy a piece to upgrade. i would never use again. it was wired right. i double checked all the wires and it just didnt want to go into program mode. the lights work just when it comes to going from honda or toyota etc no response.

-------------
Confidence is the key to any project!!

Posted By: robertsc
Date Posted: December 06, 2009 at 9:00 AM

The majority of bypasses require you to update them now.