Print Page | Close Window

508d harness

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117879
Printed Date: May 05, 2024 at 5:04 AM


Topic: 508d harness

Posted By: dcourteau
Subject: 508d harness
Date Posted: November 20, 2009 at 10:52 AM

I have a 508D that i want to connect to my Viper 5901 but i dont have the harness that come with the sensor

I know its a direct plug into the 5901 brain but the only connector that can find into the 508D that i found have 1-red 2-Black 3-white 4-blue on the sensor side but change position in the other tip of the harness, the one that connect to the brain

So somebody can post a pictures or give me the correct pinout of the brain sensor 4-pin plug
right now my harness is switching the red and black and the two zone at the other tip.



Replies:

Posted By: dcourteau
Date Posted: November 21, 2009 at 4:11 PM
Anybody ?

Just need the pin out of the sensor 4-pin plug on the 5901 brain




Posted By: t&t tech
Date Posted: November 21, 2009 at 4:22 PM
Got a meter? I would check for you but i won't be at work til monday sorry! A meter however could enable you to test for power and ground when armed wire at the port, once you find these two pins the other two would be full trigger and warn away!





Print Page | Close Window