09 jetta, idatalink ads ca

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117888
Printed Date: July 12, 2025 at 5:33 PM

Topic: 09 jetta, idatalink ads ca

Posted By: 05gt
Subject: 09 jetta, idatalink ads ca
Date Posted: November 20, 2009 at 6:20 PM

I will be putting in a nustart 4502 and the ads multi can module
as far as getting the windows to go up and down with the remote, if I wire the lock and unlock W2W instead of data and I take aux 1 output and wire it to lock and set it for the desired amount of time will this put my windows UP and Down, because the remote has a single button for arm/lock and disarm/unlock or will I need aux 1 and aux 2 to get this done

if anyone has any info so I can get this done that would be great

Mike

Replies:

Posted By: Velocity Motors
Date Posted: November 22, 2009 at 7:49 PM

Yes, this will work. Set the AUX 1 and AUX 2 for 8-10 seconds and you should be able to control the windows witht he extended pulses. Just make sure that you turn off secure auxilary so you can just press the button once instead of having to press two buttons.... just easier for the end user.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: 05gt
Date Posted: November 22, 2009 at 8:41 PM

just to verify Jeff

I will need both aux's to do this? if I want to wire up rear defrost what output could I use from the brain?

Mike

Posted By: Velocity Motors
Date Posted: November 23, 2009 at 4:04 PM

The extended pulse on the Idatalink will not work for the window controls. The protocol for the windows is different than the door locks and will require a direct connection from the AUX 1 and AUX 2 to the door wires at the module inside the door. As far as the defrost, you can change one of the POC wires to option # 17 for Defrost and this wire will control the defrost option for you.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: 05gt
Date Posted: November 23, 2009 at 6:35 PM

yah I also talked to tech support at idatalink and they said it wouldn't work, I would need to go into the door to do this

however they also said they will be updating the firmware so the modules will control windows and sunroof, but not till the spring time

thanks for the info on the rear defrost, I will be using the blade AL to get this done

Mike

Print Page | Close Window