smart junction box
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117916
Printed Date: May 19, 2024 at 3:51 PM
Topic: smart junction box
Posted By: dualsport
Subject: smart junction box
Date Posted: November 21, 2009 at 3:47 PM
Do you find the best place to make the connections for alarm installations to be the SJB because all the required wires happen to be available at that location? Or is it better to tap in at different places just to make things less obvious?
Anyone know the location of the SJB on a 2010 Ford Focus? Driver side under dash?
Replies:
Posted By: chev104275
Date Posted: November 21, 2009 at 4:58 PM
yes the SJB is under the drivers side dash
-------------
If i Can't Install it I Don't need it Joe
Posted By: chriswallace187
Date Posted: November 21, 2009 at 5:42 PM
If you can make the wiring appear integrated, I think it's better to make multiple connections in one location. Tape the harnesses together in a "T" like the factory does, group your wires during your bench prep by where they'll be connecting on the car, and you shouldn't have much trouble doing this.
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: dualsport
Date Posted: November 21, 2009 at 8:08 PM
Sounds good- definitely makes things easier with the one stop shopping access. I've got black wire loom to stash and integrate the extra wires to make it inconspicuous-
|