neutral safety switch on viper 5301

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117917
Printed Date: May 25, 2025 at 10:02 AM

Topic: neutral safety switch on viper 5301

Posted By: tehpopa
Subject: neutral safety switch on viper 5301
Date Posted: November 21, 2009 at 3:52 PM

I'm confused. I've only connected the remote start wiring so far. Nothing for door locks or trunk release. When I go to start the car I get a beep on the remote and then the parking lights flash 8 times. Checking that in the manual it's the NSS ground failure. I'm confused as this is connected to the same ground as the rest of the system. Anyone know what might be the culprit?

Replies:

Posted By: t&t tech
Date Posted: November 21, 2009 at 3:57 PM

Does that unit have a toggle switch that has to be plugged in onto the unit ? If so plug it in! On the 5701 and the 5901 it must be plugged in for remote start purposes!

Posted By: tehpopa
Date Posted: November 21, 2009 at 3:59 PM

Likely. I'll go test it now.

Posted By: howie ll
Date Posted: November 21, 2009 at 4:31 PM

Er Darren, do we even know what car this is?

Posted By: tehpopa
Date Posted: November 21, 2009 at 5:28 PM

I got it. I never connected the switch. It now turns the starter on, but no ignition. Going to go test now.

It's a 2000 Honda Accord EX, btw.

Posted By: tehpopa
Date Posted: November 22, 2009 at 12:01 AM

Everything's done but door locks. That's for tomorrow :) Thanks for all the help!

Print Page | Close Window