honda fit factory disarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117949
Printed Date: April 28, 2024 at 4:05 PM
Topic: honda fit factory disarm
Posted By: tcoop25
Subject: honda fit factory disarm
Date Posted: November 23, 2009 at 9:46 AM
I had installed a Viper Responder One (4203V) one button remote starter (with XK05 immobilizer bypass, wired D2D) in my 2007 Honda Fit a couple weeks ago. I am having trouble getting the factory disarm to work properly. Once out of every 10 start attempts, the factory alarm goes off (horn honks). Very frustrating.
I tested the white wire in the door kick and it shows 12V. When I turn the key in the door, the 12V circuit opens up, so I assume I have the correct wire. I connected the GREEN/ black wire to the factory disarm wire. Is this the proper way to wire this up? Do I need to change any settings on the remote starter?
Any other suggestions? I appreciate all the help I have gotten from this site so far. Thanks in advance.
-TC
Replies:
Posted By: jaystylez
Date Posted: November 23, 2009 at 1:08 PM
https://www.the12volt.com/installbay/forum_posts.asp~TID~117545~PN~1
this is ur second post about this why dont u continue in ur old post
------------- Stylez
|