2005 explorer tach wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118030
Printed Date: June 08, 2024 at 4:52 PM

Topic: 2005 explorer tach wire

Posted By: jferrarini
Subject: 2005 explorer tach wire
Date Posted: November 26, 2009 at 3:14 PM

What is the best wire to use for the tach signal? everything I've tried has been 12-14v not the 1-6 like viper wants.

Replies:

Posted By: calitech247
Date Posted: November 26, 2009 at 3:31 PM

Hows it goin... Try using the light blue wire (not the white wire) at any ignition coil or coil pack. If your explorer is a sport TRAC then use the tan / YELLOW wire at the PCM located on the passenger side firewall under the hood.

Posted By: chev104275
Date Posted: November 26, 2009 at 3:58 PM

you can use any uncommon wire at the fuel injectors also

-------------
If i Can't Install it I Don't need it Joe

Print Page | Close Window