Print Page | Close Window

bypass for 2000 ford taurus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118085
Printed Date: May 15, 2025 at 5:19 PM


Topic: bypass for 2000 ford taurus

Posted By: xlrexpert
Subject: bypass for 2000 ford taurus
Date Posted: November 28, 2009 at 9:50 PM

I am installing a DEI Pyton Model 1400 XL on a 2000 Ford Taurus and using a express kit (XK04). In the instuctions for the express kit, it advises you to hook a brown wire to the RCS so that the circuit is grounded when the vehicle is running.

I have looked over the wiring diagram for this circuit that grounds when running and I can't find it. Does anyone know what circuit I should be tapping into?

Thanks

PBR



-------------
PBR



Replies:

Posted By: Chris Luongo
Date Posted: November 29, 2009 at 2:18 AM
DEI calls their ground-when-running output "status."

I think it's going to be either blue/white or blue.


Print Page | Close Window