2nd car remote programming viper 5901
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118095
Printed Date: May 14, 2025 at 2:05 PM
Topic: 2nd car remote programming viper 5901
Posted By: moparguy9
Subject: 2nd car remote programming viper 5901
Date Posted: November 29, 2009 at 11:40 AM
I have a 2002 Dode Ram with a viper 5901 installed. Everything works wonderfully. According to the options of the LCD 7752v remote, it says that I am able to program another vehicle to the remote. I can pull up the menu on the remote, but it will not allow me to choose car 2 because I don't have another vehicle programmed yet. I am planning on installing the same 5901 module in my girlfriends car for Christmas, and was wondering if anyone could offer some information on how i can add my transmitter to her vehicle as car 2. Thanks for your time.
-Kyle
Replies:
Posted By: hurleyloser
Date Posted: November 30, 2009 at 3:00 AM
press and hold the F side button for 8-13 seconds, use the rem start or aux button to scroll through the menu until you see remote programming, press F to select, now scroll until you see Car 2, press F again to select, change setting to ON, exit the menu (just scroll until you see back or exit, and use F to select).
now you can press and hold F for a few seconds until car 2 comes up, press F again to toggle between the two cars.
When you're in car 2, that's when you program it to her car as you would a normal transmitter.
-------------
MECP Master Certified Technician
ASE A6 Certified Technician
|