fusion car alarm wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118268
Printed Date: May 16, 2025 at 1:06 AM
Topic: fusion car alarm wiring
Posted By: nixmx
Subject: fusion car alarm wiring
Date Posted: December 05, 2009 at 10:53 PM
I purchased a used alarm from the junkyard today and would like to know how to wire it into my car. I kept every wire and connector that was associated with it. The car was in very good shape, so I don't suspect I'm missing anything, minus the FOBs). It was $5 total, so a nice find in my opinion.
I am having the hardest time even finding information on this alarm. It's the Fusion brand, the one that makes car audio that is for sale at Fry's Electronics.
Could anyone help me with my problem? I did search, all over Google and this forum.
The model is F-3500. On the back on the main unit it reads:
PG57232000FS06
0S/N: 406AM00486
All are zeros, no "O"s.
Thank you!
Replies:
Posted By: zerepdivad
Date Posted: December 05, 2009 at 11:09 PM
Sounds like some cracked out ebay thing honestly. Maybe contact fusion and see if it's the same fusion that makes audio equipment. I find it doubtful though.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: howie ll
Date Posted: December 06, 2009 at 11:08 AM
I think you will find you've wasted $5 and your time.
|