Print Page | Close Window

2001 alero passlock ii

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118395
Printed Date: May 05, 2024 at 7:31 AM


Topic: 2001 alero passlock ii

Posted By: bgraper
Subject: 2001 alero passlock ii
Date Posted: December 10, 2009 at 6:18 AM

I am getting ready to install a remote start into the girlfriend's car. I have a T-harness and all of my ignition wiring harness connections ready to go, the lock/unlock I have wired in (using relays and resistors)...trunk....door sense...horn...parking lights...etc

I know I need a Passlock II bypass module but am having some trouble finding good information for this one.

What module should I be looking at getting? What wires need to be spliced into for the Alero?




Replies:

Posted By: Velocity Motors
Date Posted: December 10, 2009 at 7:57 AM
I suggest using the iDatalink ADS-TBSL-PL for this vehicle. Very simple installation and inexpensive.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: zerepdivad
Date Posted: December 10, 2009 at 1:22 PM
use the 2 relay method.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.



Posted By: bgraper
Date Posted: December 14, 2009 at 11:18 AM

I am a little confused.

This is the wiring diagram I found for this vehicle's installation type.

The "Pink - Ignition Input" - is incoming to this unit? Or is an input for the ignition wire?

I guess it really doesn't matter, it needs to be placed in-line with the ignition wire. Correct? How does it disarm the Passkey II? Is it through the data port or through the ignition wire input?

posted_image




Posted By: Thack79
Date Posted: December 14, 2009 at 11:42 AM
its data.  not sure which alarm you have but the ignition input on the moduel connects to the igintion of the car.



Posted By: bgraper
Date Posted: December 14, 2009 at 11:44 AM
Okay that makes sense. I was just confused because other modules show 3...4...5 connectiosn to the steering column wiring harness and this only shows 2.


Print Page | Close Window