concept 600 thatcham uk model

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118396
Printed Date: May 20, 2024 at 11:36 PM

Topic: concept 600 thatcham uk model

Posted By: cms customs
Subject: concept 600 thatcham uk model
Date Posted: December 10, 2009 at 8:01 AM

i,m working on a car that was imported from uk,and i,m trying to acces with the cliffnet wizard pro and is asking me for a pin code, how can i obtain it? please

Replies:

Posted By: cms customs
Date Posted: December 10, 2009 at 8:05 AM

IT,S VERY IMPORTANT

Posted By: howie ll
Date Posted: December 10, 2009 at 10:49 AM

There is a port on the unit for the Wiz but the alarm must be turned off via the valet or the remote control. what are you trying to do?

Posted By: cms customs
Date Posted: December 11, 2009 at 3:12 AM

i,m trying to enter setup with the computer to setup an intellistart 4 on it, i have tryed a pin code from the valet switch and is ok , but when i,m trying to enter setup from the pc is asking me for the pin code and the same one is not working, is there any proseger to do it?

Posted By: cms customs
Date Posted: December 11, 2009 at 5:30 AM

i need to enter the remote setup to set the auto start manual enable button on the remote control, the pin code is working fine with the valet switch but when i,m trying to enter with the computer is giving me a screen with the current pin code xxxx and there are two other spaces to enter a new code and to confirm the code

Posted By: howie ll
Date Posted: December 11, 2009 at 9:01 AM

So enter the same code or any other and confirm. If this is giving you grief are you sure you want to do this? You can do it manually. From 5he programming grid without getting involved with Wiz and all it's glitches. You can do everything without Wiz except Siren sounds and crank time.

Posted By: cms customs
Date Posted: December 11, 2009 at 10:01 AM

i don,t have the manuals for the concept 600 uk model, can u please send me a link to download theme online owners manual and the installation manual, thanks

Posted By: howie ll
Date Posted: December 11, 2009 at 2:51 PM

Just PM me with your email address, I'll have to scan all I have, there's no download from DEI resources for this.