programing remote ca 425

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118460
Printed Date: July 07, 2025 at 5:52 AM

Topic: programing remote ca 425

Posted By: outlaw66
Subject: programing remote ca 425
Date Posted: December 12, 2009 at 4:15 PM

I am having trouble programing a new remote (never got one when purchesed vehicle) I can reboot system by removing fuses, jump valet terminal (no buton) but the system will not go into a program mode! any help would be great

ca 425 with dei 555L

2000 yukon xl

Thanks!!!

Replies:

Posted By: i am an idiot
Date Posted: December 12, 2009 at 7:39 PM

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=425

Top of page 8 on the first manual listed.

Posted By: outlaw66
Date Posted: December 12, 2009 at 9:00 PM

thanks, but i have the manual downloaded already. heres a little more info. If I "reset" the system by removing fuses, it will flash lights untill I press the valet button. when I try to press valet to enter the program mode, I get no results. Question, at the door open wire should there be 12 volts? i've read on here that it should be grounded?? I have a remote from autoalarmpro.com and it's the one they say is compatable with my system. Basicly having trouble getting into program mode!! Please Help

2000 GMC yukon xl

ca 425 with dei interface