remote start isn’t working on 07 nbs silv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118483
Printed Date: May 16, 2024 at 6:13 PM

Topic: remote start isn’t working on 07 nbs silv

Posted By: biglimpdog
Subject: remote start isn’t working on 07 nbs silv
Date Posted: December 13, 2009 at 12:35 PM

Hello. I ripped out my 3902t and now have the Python 5702 (991) and I'm using the DLPK and have it hooked up like this

https://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CBAQFjAA&url=http%3A%2F%2Fwww.xpresskit.com%2FDocumentDownload.aspx%3Fdocumentid%3D1633%26productid%3D122%26firmwareid%3D-1&ei=ATMlS_naEISMswO6t73gDg&usg=AFQjCNHfn9nAXwQdJVHny1AsO5wIiiP5gA&sig2=nPKNfPhEn0WReCY0juaSsA

The remote gives the signal of it's all good and after a few minutes and a few single flash parking light tries (like the factory remote start does right before it fires up) but the motor never cranks up. Anyone have any ideas for me? The is a new install on a 07 Silverado New Body Style.

Replies:

Posted By: biglimpdog
Date Posted: December 13, 2009 at 1:15 PM

I also have the brake wire hooked up, acc, and ignition from the remote start/alarm, and Neutral Safety switch is grounded.

Posted By: biglimpdog
Date Posted: December 13, 2009 at 4:01 PM

figured it out. Wire was switched in the r/s harness, was in the 4 plug instead of 9 plug so I wasn't getting accy power! Runs like a champ now! Thanks, without this site I wouldn't have figured it out, love the search button!