Print Page | Close Window

02 explorer still not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118489
Printed Date: July 06, 2025 at 11:09 AM


Topic: 02 explorer still not working

Posted By: ladder49vfd
Subject: 02 explorer still not working
Date Posted: December 13, 2009 at 4:35 PM

so couple of questions:

The neutral safety. I have it hooked to the white with red stripe wire on the ignition harness, and the toggle set to ON, is that ok?

The STARTER side of the red wire which is supposed to be the starter wire has the purple  satellite wite on it, and the side that looks like it goes straight into the ingition harness has the green wire.



-------------
Peace



Replies:

Posted By: misterjimbo
Date Posted: December 16, 2009 at 10:36 AM
ground the neutral safety and see if that fixes it. If you are attempting to RS and NOTHING happens either you did not program something correctly or there is an inhibit that is tripped.




Posted By: subieken
Date Posted: December 16, 2009 at 10:43 AM

Yep, if it is an automatic trans then the neutral safety just needs to be grounded.






Print Page | Close Window