constant ground output for lock/unlock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118503
Printed Date: May 14, 2025 at 1:42 PM
Topic: constant ground output for lock/unlock
Posted By: infiniti2007
Subject: constant ground output for lock/unlock
Date Posted: December 13, 2009 at 8:11 PM
Hi, I am installing the (2way) remote start for 02 chervolet venture. I got everything to work except the lock and unlock. I keep having CONSTANT (-) OUTPUT (not Pulse) for lock and unlock wire (Prostart ct-3471 tw). I already try to reset it, but it still the same problems. Now I can not use the lock and unlock and can not disarm the factory alarm. Is there any way to get around this?. Thanks
-------------
hhh
Replies:
Posted By: howie ll
Date Posted: December 14, 2009 at 2:32 AM
2 things here, you've either wired something wrong, unlikely if it's a 2 wire lock output, possible if 6 wire (relay driven). 2nd possibility is that it's a faulty unit.
Posted By: infiniti2007
Date Posted: December 14, 2009 at 6:46 AM
No, it has only one wire for lock and one wire for unlock. I have wired the lock wire ( brown wire from rs )to RED / black of the vehicle (02 chervolet venture) and it worked at first try and after it does not.Then I test the lock wire of rs. I noticed , it has constant ground output. I do not know if I did something wrong or is it faulty unit.?
-------------
hhh
|