shock sensor arrow

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118547
Printed Date: May 11, 2025 at 8:23 PM

Topic: shock sensor arrow

Posted By: gqmanofdestiny
Subject: shock sensor arrow
Date Posted: December 15, 2009 at 10:53 AM

I'm installing an Autopage RS730 remote start/alarm and the shock sensor has an arrow on it but the instructions do not mention which way this arrow needs to point (up, down, left, right). Does anyone know if the direction of this arrow matters at all? Any information would be greatly appreciated.

Replies:

Posted By: howie ll
Date Posted: December 15, 2009 at 12:03 PM

Turning clockwise usually gives you more sensitivity.

Posted By: gqmanofdestiny
Date Posted: December 15, 2009 at 12:11 PM

I'm sorry for not being clear enough, but I meant the actual shock sensor, not the adjustment pot.

Posted By: two12
Date Posted: December 15, 2009 at 4:28 PM

I recently installed an autopage rf425 and noticed the arrow so I called autopage and they said it doesnt matter where the arrow points.

thats the main reason I chose autopage systems, because you can allways talk to a real person there without being on hold for hours or waiting on call backs that never happen.

Print Page | Close Window