Print Page | Close Window

jti 400s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118585
Printed Date: May 14, 2025 at 2:34 PM

Topic: jti 400s

Posted By: tug1
Subject: jti 400s
Date Posted: December 16, 2009 at 3:19 PM

Hello All

I have a 2003 mercury marauder with a jti 400s with remote start. the battery went dead and now after i jumped it the alarm will not work. i took the positve cable off the battery waited 20 min put in back on them the alarm chitped i would say 1 time every 20 sec. to get it to stop i would have to put it in valet mode. i tried to program the remotes to the alarm and i can't get it to go in to the program mode. turn k on them off push valet button 8 times listen for 5 chirps. nothing. I can get it to go into the advance mode same as above but hit the valet buttom 10 time and listen. i get chirps from that. so i dont know what the deal is please help thanks Tug.

-------------
Tug

Replies:

Posted By: i am an idiot
Date Posted: December 17, 2009 at 4:25 AM

To enter the programming mode of many alarms, they require you to have a door open. Did you have the door open?

Posted By: tug1
Date Posted: December 17, 2009 at 8:19 AM

No but i will go try now.

-------------
Tug

Posted By: tug1
Date Posted: December 17, 2009 at 10:17 PM

No, not even with the door open will it work

-------------
Tug

Print Page | Close Window