06 300 park light 2.4k or 1.67k?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118606
Printed Date: May 03, 2024 at 5:08 PM

Topic: 06 300 park light 2.4k or 1.67k?

Posted By: todds440
Subject: 06 300 park light 2.4k or 1.67k?
Date Posted: December 17, 2009 at 7:21 AM

Doing a remote starter on 06 Chrysler 300. I have 2 different wiring guides and they both have different values for the parking lights. Which one is correct 2.4k or 1.67k? Anyone who has done this vehicle please let me know. If not Ill figure it out when I do install. Thanks

Replies:

Posted By: subieken
Date Posted: December 17, 2009 at 5:22 PM

Get an iDatalink module and it will give you everything from the canbus. Check on their site for a vehicle specific application. If use the MULTI AL-CA boxes you'll probably have to go to a dealer to get it flashed but is saves so much headache.

-------------
Ken
JayDee AgTech
Swift Current, SK

Posted By: djfearny2
Date Posted: December 17, 2009 at 7:01 PM

dont barther with either as you will also have to wire up a relay to seperate the wire from the switch or your fog lights will flash as well.

instead you can get possitive wire in the passangter kick pannel. I am pretty sure it is white purple. to verify color look at the tail light wire harness. right side. easiest thing to do.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Posted By: metz35
Date Posted: December 17, 2009 at 8:17 PM

white purple + like djfearny2 says..
but to answer your question 1.6

Posted By: subieken
Date Posted: December 18, 2009 at 8:45 AM

Audiovox lists WHITE/ purple (+) in passenger kickpanel with 1.6k resistor, and my other source is WHITE/ brown (-) with 2k resistor at switch.

Posted By: todds440
Date Posted: December 18, 2009 at 6:54 PM

Thanks guys. Did install today , 1.6 used a relay works great! Thanks again.