Print Page | Close Window

455j and 555c

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118668
Printed Date: May 09, 2024 at 7:43 PM


Topic: 455j and 555c

Posted By: Lubrano
Subject: 455j and 555c
Date Posted: December 19, 2009 at 6:00 PM

I have two question installing these modules in a 199 jeep grand.  The 4555j has a blue-black wire (input from remote start)  I want to hook it up to H2/4 GREEN/ black (factory disarm ) on the dei brain? 

Second on the 555C it needs a (-) signal to power it up.  I have many (-) on the brain which one to use? I have (-) status output, (-) accessory relay trigger, (-) starter relay trigger, (-) ing relay trigger, (-) factory disarm, probally others I missed when reading as well. 

The unit is a 591xv.

Thank you




Replies:

Posted By: Mike M2
Date Posted: December 19, 2009 at 6:58 PM
You need to connect the blue negative wire from the 555C and the blue/black wire from the 455J and connect both to the blue status wire on the 591. No diodes needed, simply connect all 3 together.

-------------
Mike M2
Tech Manager
CS Dealer Services


Print Page | Close Window