adding powerlocks,keyless entry and alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118671
Printed Date: May 12, 2025 at 9:37 PM

Topic: adding powerlocks,keyless entry and alarm

Posted By: legion1202
Subject: adding powerlocks,keyless entry and alarm
Date Posted: December 19, 2009 at 11:04 PM

Well after install many of stero's,wiring phone system,etc I though I could install powerlocks on my 07 f150 xl.

I have a basic understanding on how this alarm works but I have a few questions. First her is the diagrams I have to look at.

< color=#22229c>https://tintnelectronics.com/manuals/aga1001.pdf

Like I said I have installed the power locks in the door panels but I do not know how to hook them up the the brain. Do i use relays? or do I just connect a lock wire and a unlock wire to the lock motor? If I do use a relay do Can i daisy chain the unlock output and the lock output? Also what type of hook up do I use on the relays?
Once I can get that firgured out I just wire the rest of the brain up to the information I have for the wiring diagram for my truck. 12V to the ignation, Find lights,etc

I`ve gotten this farm and my wife is on my back about "should have just brought it to bestbuy" but hey 8 beers and i`m feeling good I got the door panels off =)

Replies:

Posted By: zerepdivad
Date Posted: December 20, 2009 at 1:06 AM

https://www.the12volt.com/doorlocks/page3.asp#arp

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Posted By: howie ll
Date Posted: December 20, 2009 at 2:33 AM

Re the lock wires question. How about telling us what make of alarm etc, also did you buy the actuators in a kit with a relay also make of actuator and motor wire colours please.

Posted By: legion1202
Date Posted: December 20, 2009 at 8:31 AM

Forgot about the name of the alarm.. Its a aga1001 and yes the lock motors came with the kit but the kit only came with one relay. And i think thats for the kill switch

Posted By: howie ll
Date Posted: December 20, 2009 at 8:36 AM

How many terminals on the relay? The point is if the alarm only has two or three lock wires you're going to need 2 relays or a lock control module.

Posted By: howie ll
Date Posted: December 20, 2009 at 8:47 AM

Sorry, I just looked at your diagramme, it's Fig 2 and where the green and blue motor wires go, just extend the green and blue from any other motors to those two.