2005 jeep grand cherokee, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118682
Printed Date: May 13, 2025 at 1:05 PM
Topic: 2005 jeep grand cherokee, remote start
Posted By: jborders33
Subject: 2005 jeep grand cherokee, remote start
Date Posted: December 20, 2009 at 12:42 PM
I have a 2005 jeep grand cherokee and just finished installing a remote start................but, the remote start will only keep the engine running if the key is in the "on" position. If the key is just placed in the ignition, the car will start for 3 seconds then shut down............3 times. I disconnected the ignition harness from the key switch and the remote start works fine..........please help.
-------------
Joe
Replies:
Posted By: kgerry
Date Posted: December 20, 2009 at 12:56 PM
what module did you use?? how was MUX dealt with??
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: jborders33
Date Posted: December 20, 2009 at 5:34 PM
I have not installed a bypass module yet...........getting that from a local dealer tomorrow..............I was told that with the key in the ignition my remote start should work (without turning the ignition to "on". Not sure what MUX is. Thanks.
-------------
Joe
Posted By: kgerry
Date Posted: December 21, 2009 at 4:27 PM
MUX is the Multiplexed 2nd start and 2nd acc wires... did you deal with those at all? the module will do so for you, but it likely wont start without them....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|