97 mazda protege remove python alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118751
Printed Date: May 04, 2024 at 4:48 PM

Topic: 97 mazda protege remove python alarm

Posted By: ja25ca
Subject: 97 mazda protege remove python alarm
Date Posted: December 22, 2009 at 7:46 PM

I want to remove the entire alarm (A python installed in 1998), wires, switches, brainbox, etc........

Are there instructions out there that I can follow to do this? Just want to do it right the first time. the car has 190K miles and the alarm is starting to act up, ie......the door locks lock and unlock on their own.

Any help is greatly appreciated.

-------------
jim

Replies:

Posted By: jjnemoiii
Date Posted: December 23, 2009 at 3:57 PM

If you know where it is, you could also just remove the fuse that controls it. This will power down the whole thing and stop your doors from locking/unlocking on their own.

Print Page | Close Window