Print Page | Close Window

viper problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118766
Printed Date: September 06, 2025 at 1:49 PM


Topic: viper problem

Posted By: cutter820
Subject: viper problem
Date Posted: December 23, 2009 at 2:16 PM

I had a viper alarm w/ remote start installed on my 2003 dodge ram. Everything works w/ the viper. The problem is when I arm, then disarm and open my door the factory deal goes off and i have to start the truck to make it stop. It doesnt do it when the truck is remote started then unlocked to open doors (obviously because its running already) guy that installed it wont answer, so he prolly just doesnt know. HELP PLEASE!!!!!!!!!!



-------------
CUTTER



Replies:

Posted By: KPierson
Date Posted: December 23, 2009 at 2:55 PM
It sounds like the factory disarm wire wasn't connected.

-------------
Kevin Pierson



Posted By: cutter820
Date Posted: December 23, 2009 at 2:58 PM
OK. Can u maybe help me and tell where or how i do that???

-------------
CUTTER



Posted By: cutter820
Date Posted: December 23, 2009 at 3:02 PM
i checked old threads to see if there was any info. but, there wasnt.

-------------
CUTTER



Posted By: cutter820
Date Posted: December 23, 2009 at 3:08 PM

FCTRY ALARM ARM|lt GREEN/ orange *4  |-  |driver kick panel           |
|FCTRY ALRM DISARM|same wire           |   |                            |
| DISARM NO UNLOCK|same wire           |   |                            |

Do i need to do sumthing w this?????



-------------
CUTTER



Posted By: tedmond
Date Posted: December 23, 2009 at 5:01 PM
bring it back and tell the guy to hook up the factory alarm disarm wire from the unit. thats the only way to prevent it from wailing on you. you paid for a service so have it fixed.


Print Page | Close Window