g6 remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118790
Printed Date: May 10, 2024 at 8:55 AM
Topic: g6 remote start
Posted By: chawkin1990
Subject: g6 remote start
Date Posted: December 24, 2009 at 1:00 PM
Ok I am installing a viper 571xv in a 2007 pontiac g6. I am using the pkugm2x. Any help would be great thanks!
Replies:
Posted By: Twelvoltz
Date Posted: December 24, 2009 at 2:59 PM
Is this a question?
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: joebubba
Date Posted: December 24, 2009 at 4:11 PM
why bother even posting a smart*** remark if you're not going to help?
Posted By: zerepdivad
Date Posted: December 24, 2009 at 5:52 PM
Definitely wasn't a question that i saw.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: Twelvoltz
Date Posted: December 24, 2009 at 9:08 PM
chawkin1990 wrote:
Ok I am installing a viper 571xv in a 2007 pontiac g6. I am using the pkugm2x. Any help would be great thanks!
OK, so I am a smart*** but no matter how many times I read this I still don't see your question. Considering this is your first post to the forum I MUST be the one at fault here. Welcome, and I hope all of your further "questions" and comments are as well thought out as these. ------------- Installer, IT support, and FFL. I need less hobbies.
Posted By: mustyk@att.net
Date Posted: December 25, 2009 at 8:41 AM
Except for a few connections at the ignition switch with PKU unit you can do all other connections on the right side of the console at the BCM. This allows you to finish ALL other connections to the Remote start.
-------------
thetopinstaller
Posted By: Chris Luongo
Date Posted: December 25, 2009 at 11:03 AM
Joebubba, he wasn't trying to be mean, but we can help more if you have something in particular you need help with, such as finding a particular wire, or something from the install guide you don't understand.
I haven't used that module before, I usually just use a blank aftermarket key in a universal bypass box, only because it's less expensive.
The only tip I can think of for that particular car is that you can find almost everything you need in the driver's kick panel, in the harness running to the rear of the car---easy access and plenty of room to make your connections.
In that kick panel you can find: constant (big BLACK/ red I think), ground, brake lights, parking lights, horn, doorlocks. You can probably find a domelight wire there for your door trigger, but I've never tried.
The kick panel also has accessory and ignition wires, but they don't work for remote start---I've tried. Get your ignition and accessory at the ignition switch.
Posted By: el ranchero
Date Posted: December 25, 2009 at 9:21 PM
hey boys, peace it christmas, here we are friends no fights just misunderstandings. peace!
-------------
rocker
Posted By: chawkin1990
Date Posted: December 27, 2009 at 3:35 PM
I have a question im stumped on 2 wires on the pku unit the brown ground output when running and the violet start wire where do these go?
Posted By: chawkin1990
Date Posted: December 27, 2009 at 3:37 PM
My question is what do i hook the brown ground when running wire and the violet start wire from the pku unit? thanks
Posted By: tedmond
Date Posted: December 27, 2009 at 3:44 PM
brown ground when running goes to the rs module. connect that to the GROUND WHEN RUNNING aka STATUS output on compustar/dei units.the purple start wire commin from the rs or the bypass? ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: chawkin1990
Date Posted: December 28, 2009 at 10:21 PM
The bypass unit.
Posted By: chawkin1990
Date Posted: January 05, 2010 at 10:43 PM
Any one know where the start wire goes too from the pkugm2x?
|