Print Page | Close Window

prostart ct5000 reprogramming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118791
Printed Date: April 28, 2024 at 1:12 AM


Topic: prostart ct5000 reprogramming

Posted By: sof2request
Subject: prostart ct5000 reprogramming
Date Posted: December 24, 2009 at 3:39 PM

Hey! Well, I have a 1994 GMC Safari and had a ProStart ct5000 installed by a local store. Worst mistake of my life. Well everytime the battery dies on the vehicle I'd go back to the stre and pay them 60 bucks to re-program it.

Now after 4 times I'm kinda fe up and I want to learn how to reprogram it myself. So anyways here we go.

First I try to flash the module by holding the hood pin for 4 seconds and then releaseing, pressing it down and letting go, for some reason it doesn't work, any tips?



Replies:

Posted By: sof2request
Date Posted: December 24, 2009 at 9:53 PM
By the way, for some reason, my parking brake lights won turn on during any procedure...




Posted By: tedmond
Date Posted: December 25, 2009 at 10:01 PM

when you remote start or unlock, does the parking lights flash?

the unit even if the battery dies on the car, it should not dump the remotes from its memory.



-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: sof2request
Date Posted: December 26, 2009 at 11:09 AM
No there is no response from the vehicle, no lights turn on nor even a sound.




Posted By: Falcon 1
Date Posted: December 27, 2009 at 7:19 PM

Try unplugging the main harness from the remote start module wait a few seconds then plug it back in and press the start button on the remote.



-------------
Do it right the first time, only a doctor can bury his mistakes.




Posted By: sof2request
Date Posted: December 27, 2009 at 9:03 PM
Ok I'll try it when I get the chance





Print Page | Close Window