on viper 5701

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118806
Printed Date: May 16, 2025 at 6:20 AM

Topic: on viper 5701

Posted By: nhoff82
Subject: on viper 5701
Date Posted: December 25, 2009 at 12:37 PM

I was wanting to install a viper 5701 with the idatalink ads-al ca into a 01 cadillac deville. was wondering if anyone had wiring info for me.. any help would be appreciated

Replies:

Posted By: t&t tech
Date Posted: December 25, 2009 at 1:04 PM

Cadillac deville

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: nhoff82
Date Posted: December 25, 2009 at 6:26 PM

im not sure where to hook up the ground when running and the lock/arm-input the unlock/disarm-output from the datalink to the viper

Posted By: tedmond
Date Posted: December 25, 2009 at 6:45 PM

take the outputs of the viper and match them to the input of the idatalink.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: nhoff82
Date Posted: December 25, 2009 at 11:29 PM

alright thanks do i have to use a relay on the ignition wires?

Posted By: t&t tech
Date Posted: December 26, 2009 at 11:13 AM

You may need a relay to power the additional accesory wire, sine the 5701 only has one accesory output!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: tedmond
Date Posted: December 26, 2009 at 3:06 PM

if oyu need to power up addition circuits for the remote start, grab a relay and wire it like so

85 - acc, ign or start (-) output from alarm/rs
86 - constant 12v
87 - constant 12v
30 - to wahtever wire you intended its use for

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: nhoff82
Date Posted: December 27, 2009 at 12:28 PM

thanks, im not a brand new installer, just having trouble understanding some of viper diagrams

Print Page | Close Window