parking light wire at headlights possible?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118899
Printed Date: July 20, 2025 at 4:40 PM
Topic: parking light wire at headlights possible?
Posted By: legenux
Subject: parking light wire at headlights possible?
Date Posted: December 28, 2009 at 4:52 PM
I'm having trouble finding the parking wire for 03 murano. Question is can I tap into the parking light at one of the headlights? The remote starter (Audiovox APS 901N) puts out a + to parking light, so I am planning to tap this wire up to the parking wire at the headlights. Is this okay to do? Thanks.
Replies:
Posted By: jim hunter
Date Posted: December 28, 2009 at 4:57 PM
you should be able to catch a RED / blue wire above the hood release in a white 14 pin plug, or if you cant find that it should be in the kick panel, you dont have to run that wire all the way out under the hood
Posted By: t&t tech
Date Posted: December 28, 2009 at 5:55 PM
As jim said! However if you have already routed the wire to the lights then there would be no problem in connecting it there!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: legenux
Date Posted: December 28, 2009 at 6:24 PM
Thanks guy. I already route a wire to the light. Just wanted to verify if its okay to do it.
Posted By: t&t tech
Date Posted: December 28, 2009 at 8:48 PM
You're most welcome! Cheers!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: tommy...
Date Posted: December 28, 2009 at 9:04 PM
How are you making and sealing the connection...? ------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: tedmond
Date Posted: December 28, 2009 at 9:34 PM
lets hope its soldered, and the wire fed through an existing rubber grommet.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: legenux
Date Posted: December 28, 2009 at 10:02 PM
tedmond wrote:
lets hope its soldered, and the wire fed through an existing rubber grommet.
All soldered, and thru rubber grommet.
|