ca 500 code alarm programming remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118909
Printed Date: July 19, 2025 at 5:07 AM
Topic: ca 500 code alarm programming remote
Posted By: blurry
Subject: ca 500 code alarm programming remote
Date Posted: December 28, 2009 at 9:30 PM
I had a tough time finding information on how to program an additional remote for my ca-500. CodeAlarm Customer service was great:
turn ignition on
push button 3 times
hit lock on remote (should hear click)
hit button one more time
hit unlock on remote (should hear click/s)
hit button one more time
hit trunk button (should hear click)
hit button one more time
hit start button (should hear click)
turn off key
Button is wired to blue two pronged connector (the shop that installed ours kept the button, so i used two wires with leads that fit the pins
hope that helps someone!
Replies:
Posted By: tommy...
Date Posted: December 29, 2009 at 11:22 AM
Thanks for the post... I almost always use Code pieces...! I dont recall having to hit each button...That was last years model i believe...But glad you got it...!
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
|