secure lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118911
Printed Date: May 05, 2024 at 6:59 PM

Topic: secure lock

Posted By: rfwave
Subject: secure lock
Date Posted: December 28, 2009 at 10:12 PM

I am installing a remote starter on a Lexus 300. I am using a secure lock to disarm the factory alarm.

This means the vechicle has to be unlocked first to remote start and then lock after engine starts.

My question is do I have to connect the disarm and arm wires from remote starter together with the unlock and lock wires?

Thanks in advance.

Replies:

Posted By: chadwa2003
Date Posted: December 28, 2009 at 10:18 PM

What system you are installing would help. From the sounds of it its in the autostart family (prostart, command start and so on) if so then no

Posted By: rfwave
Date Posted: December 29, 2009 at 7:30 PM

its Prostart . Yes its worked !

Thanks to you CHADWA .

Print Page | Close Window