how do you wire a 5 wire actuator
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118969
Printed Date: May 16, 2025 at 7:24 PM
Topic: how do you wire a 5 wire actuator
Posted By: reyhb
Subject: how do you wire a 5 wire actuator
Date Posted: December 30, 2009 at 8:56 PM
Can anybody help I have an alarm that throws a negative pulse for unlock and lock and would like to wire a 5 wire actuator to drivers side door, I have seen the wiring diagram for connecting 2, two wire actuator with 2 relays. Does anybody have a diagram to wiring one 5 wire actuator to drivers side and one to passenger side.
Replies:
Posted By: tedmond
Date Posted: December 30, 2009 at 9:14 PM
85 - neg trigger from alarm (lock or unlock)
86 - constant 12v
87 - constant 12v
87a - motor wire switch side
30 - motor wire coil side this is assuming you meter the wire first with a dmm and the wires rest at ground, and switch to 12v when activated. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: i am an idiot
Date Posted: December 30, 2009 at 9:36 PM
Use the relays for the 2 wire acturators and use only the blue and green wires of the actuators.
Posted By: reyhb
Date Posted: December 30, 2009 at 9:50 PM
Thing is I would like to have the option of having the 5 wire actuator work like it was made tos, example: unlocks all when u pull it up and locks when you push it down so I dont have to reach over to the other side of the car or so I dont have to push the unlock on the remote neither
Posted By: i am an idiot
Date Posted: December 30, 2009 at 9:53 PM
What color are the other 3 wires?
Posted By: reyhb
Date Posted: December 30, 2009 at 10:07 PM
Black,Brown,White,Blue,Green
Posted By: howie ll
Date Posted: December 31, 2009 at 2:31 AM
Momentary switch, centre off, ground to centre, white and brown to each side, also ground the black from the motor, alternatively buy a proper door lock relay from Spal etc. When wired you will activate both motors from the driver's door key.
|