Print Page | Close Window

viper 5902 problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118973
Printed Date: May 17, 2025 at 12:44 PM


Topic: viper 5902 problem

Posted By: ONEBALL77
Subject: viper 5902 problem
Date Posted: December 31, 2009 at 7:06 AM

I just completed the install on a 96 Acura 3.5 RL. My problem is with the siren, everything else works as it should. I get no sound (arm, disarm, panic, car finder, or full alarm) unless the car is remote started. Any ideas?



Replies:

Posted By: ONEBALL77
Date Posted: December 31, 2009 at 8:33 AM
ha ha... Siren wire got pinched on a nut behind the steering column... stupid motorized steering column!



Posted By: tedmond
Date Posted: December 31, 2009 at 2:55 PM
your lucky it didnt short and create a fire. the siren ouput is 12v, and if it touched ground ,you would have quite the firework show inside.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: t&t tech
Date Posted: December 31, 2009 at 4:16 PM
Nah Ted, it won't have caused fire, the output of the unit would have shorted out first!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5


Print Page | Close Window