command start 290i manual
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118993
Printed Date: July 15, 2025 at 1:27 AM
Topic: command start 290i manual
Posted By: lenl
Subject: command start 290i manual
Date Posted: January 01, 2010 at 12:17 AM
Good day, I am looking for an installation manual for a Command start 290i, I had looked through this great forum and found car wiring diagrams but could not locate the unit install instructions.
I am looking to install a new remote start in the car and feel the instructions would help identify the wires.
Thank you
Larry
Replies:
Posted By: rrightaway
Date Posted: January 02, 2010 at 5:22 PM
heres the wiring diagram for the 290i unfortunately its all i could find im my files hope this helps ,i also included programming guide for the 270i they should be close . if pics dont go through email me and ill send them direct to your mail ricksandra@tbaytel.net rickd
Posted By: Velocity Motors
Date Posted: January 03, 2010 at 1:04 PM
Same as the Command Start CS310i------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: lenl
Date Posted: January 03, 2010 at 4:04 PM
Thank you very much.
Larry
Posted By: lenl
Date Posted: January 05, 2010 at 9:47 PM
Well I cut the sensor wire and that seemed to stop the random starts. The installer hid it quite well, under one of the plastic wire covers. I would guess this will eliminate the cold start feature. At least the command start is working!
Thanks to all!
Larry
Posted By: nocrankcase777
Date Posted: February 24, 2010 at 2:34 PM
Hey Jeff, You wouldn't happen to have the complete operators/programming manual for the CS310i? If you do could you email me a copy to j_k_c-s@hotmail.com Thanks, James
Posted By: jmcstevenson
Date Posted: May 16, 2010 at 11:45 AM
Hi, I have an old CS275i that I need the installation/programming manuals for. I'm guessing it'll be pretty close to the 270i which you said you have copies of? Could I bother you to send them to me at jmcstevenson@gmail.com ? Thanks
|