09 ram clifford 50.7 chall bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118997
Printed Date: April 29, 2024 at 3:35 AM
Topic: 09 ram clifford 50.7 chall bypass
Posted By: donsmith249
Subject: 09 ram clifford 50.7 chall bypass
Date Posted: January 01, 2010 at 10:58 AM
This is the first time I have used the express kit bypass and I have to say the instructions seem very vague to me. First off the wires on the instructions going from the Chall to Conn. 2, (I am assuming is the connector 2 on the alarm) say 1way. Do they mean for one way alarms not 2way like the 50.7 and if so I don't need to hook them up? Second it says under vehicle functions it has start data? After talking to a few friends they think it means that I only don't need to hook up the start wires from the alarm? any help would be great
Thanks
Replies:
Posted By: monty_77
Date Posted: January 02, 2010 at 11:08 AM
with this type of bypass you do not make many connections to the vehicle it self after plugging in t-harness.
that particular alarm start combo should be full 2way compatible with the d2d connection.
so other then the power wire and the parklights of the alarm/remote starter to the vehicle. you should only have to hook up the ignition wire + of the remoter start to the bypass.
as for the alarm you will still have to set up shock sensors and siren.
but the doors and the hood pins should all come throught the bypass
now if the alarm/RS is not 2way compatible for the d2d conection them you have to hook up the wire that are labeled with 1-way on the instructions to the alarm remote starter wires.
|