small issue, viper 5000, autostart, 04 f150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119000
Printed Date: July 05, 2025 at 11:22 AM

Topic: small issue, viper 5000, autostart, 04 f150

Posted By: dr d
Subject: small issue, viper 5000, autostart, 04 f150
Date Posted: January 01, 2010 at 12:13 PM

Hey guys i did a viper 5000 and an autostart in a 04 F150

so im controlling the autostart with the trunk output from the viper

and what im asking is what relay setup do i use to split the ignition trigger on the viper during remote start

and what output do i use to trigger it GWA from viper or GWR from remote start

note* the alarm doesnt have a feature to turn off ignition monitoring

also keep in mind if i cut the ignition input to the viper the led will never reset and customer has to drive with the LED flasing the last zone triggered forever...lol

any help would be awesome

Derek

-------------
HOW HIGH IS UP ??

Replies:

Posted By: t&t tech
Date Posted: January 01, 2010 at 1:16 PM

Use the GWR and wire to a relay like this

Pin 30 and 86- to true ignition wire from the car

Pin 87a- to the ignition wire from the alarm

Pin 85- to the GWR wire of the starter.

Customer just has to ensure he disarms the system before he steps on the brake to drive off!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: dr d
Date Posted: January 01, 2010 at 1:23 PM

very helpfull thanks a ton

-------------
HOW HIGH IS UP ??