02 mercury cougar ignition wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119055
Printed Date: May 17, 2024 at 3:58 AM

Topic: 02 mercury cougar ignition wire

Posted By: flamedroc
Subject: 02 mercury cougar ignition wire
Date Posted: January 03, 2010 at 11:16 AM

I am installing a bulldog rs1100 remote start on an 02 Mercury Cougar V6. I am completely stumped on where I wire in my bypass module's blue wire and my remote starts white security bypass wire. It says it needs to be grounded while running, but I cannot find anything that grounds while running. I tried using the crankwire but that just drained the battery, and also did not work. If I put the blue wire from the bypass and the white wire from the remote starter I can get it to crank, but then cannot use the key in the ignition for normal operation. What am I missing.

I know this is an easy answer to someone

Jason

Replies:

Posted By: flamedroc
Date Posted: January 03, 2010 at 11:18 AM

EDIT: If I put the blue wire from the bypass and the white wire from the remote starter TO GROUND I can get it to crank, but then cannot use the key in the ignition for normal operation. What am I missing

Posted By: i am an idiot
Date Posted: January 03, 2010 at 12:06 PM

THere should be a ground while running wire on your remote start unit. It may also be turning on the parking lights to let you know the vehicle is running.

Posted By: dasbogie
Date Posted: January 04, 2010 at 12:46 PM

Is there a yellow/black wire on the bulldog, I believe the manual says no connection but you could try to remote start the car with the key in ignition and meter that wire and see if there is a gound when running output, if so that's the wire you want to go to blue status wire from bypass.