2005 dodge caravan keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119186
Printed Date: July 07, 2025 at 10:31 PM

Topic: 2005 dodge caravan keyless entry

Posted By: jaynen
Subject: 2005 dodge caravan keyless entry
Date Posted: January 08, 2010 at 7:11 PM

I went and installed keyless entry for my dads van and the lock and unlock works, but now when I start the van the wipers turn on and wont turn off unless I lock the van. I am supposed to use a 2000ohm resistor for unlock and a 5200ohm resistor for lock. I was unable to find a 5200ohm resistor and put in a 5100ohm resistor instead. Could this be a problem? The lady at the electronics store said should make no differance. Should I look else where?

Replies:

Posted By: jmw505
Date Posted: January 08, 2010 at 10:20 PM

well that resistor i think is to far off and are you sure you are not hooking up the wipes because i have done that before but i intended to do it

this is how it needs to be hooked up just incase you have it wrong
posted_image

Posted By: jmw505
Date Posted: January 08, 2010 at 10:21 PM

just go to this link

https://64.85.6.129/extrainfo/diagrams/17044_CARAVAN_CHRYSLER%20MINI%20VAN%2001%20-%20UP%201%20WIRE%20JBS%20UNITS.pdf

Posted By: metz35
Date Posted: January 08, 2010 at 10:43 PM

i dunno what others go by, but i go by + or - 5% tolerance. and using a 5100 is in that tolerance...ive never had a problem but there is a first for everything

Posted By: 91stt
Date Posted: January 08, 2010 at 10:53 PM

make sure you have it wire for chassis ground and not relying on the transistor neg output

Posted By: jaynen
Date Posted: January 09, 2010 at 7:43 AM

Ya I originally hooked up the lock unlock to the wrong wire, (the wipers wire). So maybe when I closed everything up something is getting grounded that shouldnt be. Thanks for the replies though guys, I am gonna go look at it now.

Print Page | Close Window