total closure peugeot

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119207
Printed Date: May 17, 2024 at 8:09 PM

Topic: total closure peugeot

Posted By: lee_hdi
Subject: total closure peugeot
Date Posted: January 09, 2010 at 6:27 PM

Hello,
I was wondering if anyone could give me any pointers or tips on how to fit total closure for the windows on my 2001 Peugeot 206. It used a non-mulitplexed electrical system. It doesn't have an alarm as standard.

Thanks,
Lee

Replies:

Posted By: howie ll
Date Posted: January 10, 2010 at 3:27 AM

Go to the BSI/fusebox on the right hand side (assuming you're in the UK),
Left hand big back plug, top side.
One of the wires will give a pos pulse on locking.
That's fed to a DEI 508d set to give you a 10 sec. neg pulse, run the output to the centre console then install a DEI 529t or similar window closer unit there's space under the centre section forward of the window switches.

Posted By: lee_hdi
Date Posted: January 10, 2010 at 11:41 AM

thanks for the help

Print Page | Close Window